- A+
Introduction
When it comes to printing documents or photos, Canon printers are one of the most popular choices among users. These printers are highly reliable and offer a wide range of features to cater to the needs of different users. However, like all printers, Canon's printers require periodic maintenance, including cleaning and replacing ink cartridges or toner. And sometimes it's necessary to reset or clear the ink counter to ensure uninterrupted and efficient printing. In this article, we will discuss the step-by-step process of resetting the ink counter on the Canon e478 printer.
Step 1: Turn on the Canon E478 printer
The first thing you need to do is turn on the printer. Make sure it is connected to a power source and press the power button. Allow the printer to go through its startup procedure and make sure there are no errors or warnings displayed on the printer screen.
Step 2: Press and hold the "Stop/Reset" button
The next step is to locate the "Stop/Reset" button on your Canon E478 printer. Once you find it, press and hold it for at least five seconds. This will initiate the ink counter resetting process.
Step 3: Release the "Stop/Reset" button
After holding the "Stop/Reset" button for five seconds, release it. At this point, the printer will detect that you have released the button and start the ink counter resetting process. During this process, the printer's screen will display a message that says, "The ink absorber is almost full."
Step 4: Press and hold the "Stop/Reset" button again
When the message appears, press and hold the "Stop/Reset" button again. Keep holding it for about five seconds, and then release it. This time, the printer will start the ink absorber reset process.
Step 5: Wait for the printer to complete the reset
After you release the "Stop/Reset" button for the second time, wait for the printer to complete the reset process. This may take a few minutes. Once the printer has finished the reset process, it will display a message that says, "The ink absorber has been reset."
Step 6: Turn off the printer and turn it back on
Finally, turn off your Canon E478 printer and let it sit for a few minutes. This will allow the printer to cool down. After a few minutes, turn on the printer again and verify that the ink counter has been reset by printing a test page. If the test page prints successfully, then your ink counter has been successfully reset.
Conclusion
Resetting the ink counter on your Canon E478 printer is a straightforward process that requires only a few steps. By performing this task regularly, you can ensure that your printer operates correctly and efficiently. However, always remember to handle your printer with care and follow the instructions given in this article to prevent any damages to your printer.
