- A+
Brother DCP7360 Printer Resetting Guide
The Brother DCP7360 printer is a reliable and efficient printer that has been used by many. However, like any other printer, it can develop errors that prevent it from functioning properly. Sometimes, resetting the printer can help rectify the error and get it running again. Here is a guide on how to reset the Brother DCP7360 printer.
Resetting the Drum Counter
The drum counter keeps track of the number of pages printed and notifies you when it’s time to replace the drum unit. However, if you’ve replaced the drum unit and the counter still indicates that it needs to be replaced, you can reset the drum counter. To do this, press the “Clear/Back” button on the control panel for 1-2 seconds until “Drum Clear” appears on the display. Press “1” to indicate “Yes” to reset the drum counter.
Resetting the Toner Cartridge
If the printer still shows a toner low message after replacing the toner cartridge, it is possible that the toner cartridge hasn’t been reset properly. To reset the toner cartridge, hold down the “Clear/Back” button for 1-2 seconds until the display shows “Toner Clear.” Press “1” to reset the toner cartridge.
Factory Resetting the Printer
If the above methods do not work, you can do a factory reset on the printer to reset all settings to their default values. To do this, turn off the printer and disconnect it from the power source. Press and hold the “Go” button on the control panel while reconnecting the power cord. Continue to hold the “Go” button until the status LED lights up and then release it. All of the LEDs should light up, indicating that the printer has been reset to its factory settings.
Conclusion
The Brother DCP7360 printer is a great printer that can develop errors that prevent it from functioning properly. However, resetting the printer can help solve these errors and get it up and running again. The drum counter, toner cartridge, and factory resetting are three methods that can help reset the printer.
