- A+
Introduction
If you own a HP477dn printer, you may eventually encounter a situation where the printer's waste ink needs to be cleared out. This is because overtime, the printer accumulates small amounts of ink when the printer cleans its heads or during the print process.
Step 1: Preparation
The first step to clearing waste ink is to disconnect your printer from power source and remove all cables connected to it. This is especially important for your safety as you do not want to get an electric shock while working.
Step 2: Disassembling the printer
To access the waste ink cartridges, you must access the internal components of the printer. Start by removing the paper tray, then remove all the screws on the printer body. Once the screws have been removed, carefully separate the body of the printer from its components.
Step 3: Cleaning the waste ink cartridges
Now that you have access to the waste ink cartridges, carefully remove them, taking care not to damage any other components. Once removed, use a soft, clean cloth to wipe the cartridges clean. Be careful to not get ink on your hands or the surrounding area as it can be difficult to remove.
Step 4: Reassembling the printer
Carefully reassemble the printer by putting all the components back together, screwing them into place. Once all the components are in place and secure, plug the printer back into power and connect all cables.
Step 5: Testing the printer
Turn on the HP477dn printer and ensure that all components are working properly. Check if the waste ink error message has disappeared and ensure that the printer is printing correctly.
Conclusion
In conclusion, do not let accumulated waste ink in your HP477dn printer cause valuable time and resources. Disassembling the printer and cleaning the waste ink cartridges regularly can significantly increase the life of the printer. Remember to handle the cartridges and ink with care as they can easily stain.
